Responding to a Abrupt Hot Water System Failure: Expert Advice
Responding to a Abrupt Hot Water System Failure: Expert Advice
Blog Article
Were you interested in advice on What Would Cause My Electric Water Heater to Stop Working??
Many modern-day homes use an electric water heater for their heating unit, due to its convenience and ease of use. However, much like any other electric devices, troubles might develop with its usage, unexpectedly. It can be truly aggravating to get up to a chilly shower instead of a hot one or having your bathroom with water that isn't hot enough or even also warm. Whatever the situation may be, water heater troubles can be rather stressful. Thankfully, we've made a list of feasible solutions to your water heater issues. There are a number of factors that could trigger a lot of these issues, it could be an issue with the power supply, the electric burner, or the thermostat. Before doing anything, ensure you switch off the major power supply for safety and security. Whatever the issue is, getting it repaired should not posture way too much of a problem if you follow these actions:
Call An Expert:
If after replacing all malfunctioning components as well as resetting your temperature, the water heater still isn't functioning, you may require to get in touch with an expert plumber for a specialist viewpoint. The issue with your heater could be that the cold and hot faucets have actually been switched or it might be undersized for the amount of warm water needed in your house. Whatever the instance might be, a professional plumber would certainly aid resolve the trouble.
Check Your Power Supply:
As fundamental as this might appear, it is very required. Without ample power, your water heater will certainly not operate. So the first thing to do when your water all of a sudden retires is to confirm that it isn't a power problem. Check if the fuse is burnt out or the breaker stumbled. If the breaker is the problem, just turn it on and off again. Replace any kind of broken or damaged fuse. Examine the device with power after these changes to see if it's now working.
Examine Your Thermostat:
If your hot water heater still isn't working or the water coming out isn't hot sufficient, you may require to check the temperature level setups on your top thermostat. Guarantee the breaker is turned off before doing anything. Open the accessibility panel and press the red button for temperature reset above the thermostat. This must assist heat up the water. Turn the breaker back on and also inspect if the issue has been resolved.
Inspect the Burner in the Water Heater:
If it's not a power issue, after that try looking into your burner if it is still working. Evaluate each of your heating elements to make sure the problem isn't with any of them. If any of them is faulty, replace that component and afterwards inspect whether the warm water is back on.
Final thought
Water heater issues are not always major. A lot of them are due to small problems like a blown fuse or worn-out heating element. Replacing the faulty components need to suffice. Nonetheless, if you are still not able to fix the issue, give a call to your nearest plumber to find to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Do you appreciate reading up on How to Troubleshoot and Repair an Electric Water Heater? Make feedback down below. We'd be interested to know your suggestions about this piece. Hoping that you come back again in the future. Do you know anybody else who is enthusiastic about the niche? Be sure share it. Thanks for taking the time to read it.
Plumbing crisis? Contact our experts. Report this page